Read other answers Q:Have closed in treads with "cap" on riser the extends 1/4 inch into stairs. Ideally, I need to remove these to install tread but builder glued and nailed. I tried to remove and started to pull top of riser out. Can I cut a kerf on back of these treads to allow a little bending to get these in?
A:You could try and cut a kerf on these treads but it's highly unlikely that they will bend - they're solid 3/4" Oak and very sturdy. Since these particular treads are prefinished, you'd run a good chance of splitting or cracking the finish as well if it did bend. You'd probably have a much better chance of moving the moulding than you would of bending this tread. If you e-mail us a couple of pictures of your installation, we may be able to offer other opinions.
Read other answers Q:What can you do for me. I have 6 stairs measuring 22 on one side, 10 on the other and 46 inches wide on curved stairs. ???
Mike
A:You can email in photos with dimensions or drawings into us with the species or stain color you are interested in. We will be happy to take a look and see if we can assist you, and get a quote to you if we can!
Read other answers Q:Hi
I'm from Kingdom of saudia arabia
I like your product wood stair tread and I want it but the measurement of my stair is
130cm*0.30cm Do you have this size?
A:130 cm x 0.30 cm translates to roughly 51 in x 1/8 in. The thinnest tread we will make is 3/4" but do offer risers in 1/4" thickness and wood veneer is available thinner - but we do not recommend wood veneer as a surface to walk on - it's too thin to withstand foot traffic.
For your stairs, you may consider a 54" retro tread:
http://woodstairco.com/red-oak-natural-retro-stair-tread-closed-54-in.html
For shipping rates outside of the US, please contact us with your information:
http://woodstairco.com/contacts/
Read other answers Q:Do you have retro fit for open stairs?
A:We have Retro Double Return Treads for open staircases. Below is a link to all of the double return retro treads. You can sort on the left side of the screen by species and stain color.
https://woodstairco.com/url/Te
Read other answers Q:Are these treads finished?
A:Yes - these treads have our Aluminum Oxide top coat:
See this link for more info:
http://woodstairco.com/faq/diamond-coat.html
Read other answers Q:Are your retro treads and risers exactly the length stated or is there a little extra to account for the variations in a standard size stair?
A:We guarantee the treads (or risers, landing tread, etc) to be at least the length indicated and may or may not be slightly overlength. Any overlength is a result of our manufacturing or distribution processes and not for jobsite variations.
If your measurements are close to the length indicated, it's always best to go up one size. Having the extra material to make angled or additional cuts makes installation significantly easier. Most staircases vary in width towards the top or bottom of the staircase and the extra material avoids you running short and saves shipping costs as well as lead-time should a larger one need to be ordered.
Log In