WoodStairCo's Red Oak Landing Panel System is the purpose-built solution for finishing staircase landings, pie steps, kite steps, and other large, irregular stair surfaces that standard treads cannot cover. Engineered tongue-and-groove Red Oak panels that install like hardwood flooring—no special tools, no contractor required.
Each bundle covers approximately 13 square feet and includes panels 3/4 inch thick x 3 inches wide, in lengths from 72 to 94 inches—designed to accommodate the majority of residential staircase landings and pie-step configurations. The 10-ply engineered base handles seasonal climate variation without the expansion and contraction of solid wood, while a 4mm+ solid Red Oak wear layer delivers the look, texture, and refinishability of real hardwood.
Available unfinished for a custom on-site stain match, or choose from 16 prefinished stain colors—the same options available on WoodStairCo's retro and traditional stair treads—for a consistent staircase renovation from the first step to the landing.
Important: The Landing Panel System covers the field of the landing or pie step. The leading edge (nosing side) requires a Landing Tread, sold separately. See our Landing Tread range to complete your project.
SPECS
- Panel thickness: 3/4 inch (matches standard stair tread thickness)
- Panel width: 3 inches | Profile: Tongue-and-groove (T&G)
- Panel lengths: 72–94 inches
- Coverage: ~13 square feet per bundle
- Wear layer: 4mm+ solid Red Oak
- Base: 10-ply engineered for dimensional stability
- Finish options: Unfinished ($236.04) or Prefinished in 16 stain colors ($326.91)
- Leading edge: Landing Tread required (sold separately)
- Species: Red Oak | Janka hardness: 1,290
- Current special price: $183.64 (Unfinished), valid until Jun 30, 2026
COLOR OPTIONS—Select on Product Page
|
Color
|
Tone Description
|
Price
|
|
Unfinished
|
Raw Red Oak—stain on-site to any color
|
$236.04
|
|
Natural (Prefinished Clear)
|
Warm honey-amber, no stain pigment
|
$326.91
|
|
Gunstock (F29)
|
Warm orange-amber—most popular US floor match
|
$326.91
|
|
Golden Oak (D25)
|
Light honey-gold—bright and classic
|
$326.91
|
|
Butterscotch (D34)
|
Warm amber-honey—mid-tone
|
$326.91
|
|
Saddle (G50)
|
Medium leather-brown—transitional
|
$326.91
|
|
Smoke (H15)
|
Grey-brown—modern transitional
|
$326.91
|
|
Greystone (A47)
|
Cool grey—contemporary
|
$326.91
|
|
Dusk (H8)
|
Deep espresso-brown—dramatic
|
$326.91
|
|
Lowcountry Cordial (B21)
|
Sophisticated medium-dark brown
|
$326.91
|
|
Lowcountry Toffee (B32)
|
Warm caramel-brown
|
$326.91
|
|
Anneal (C28)
|
Warm aged hardwood tone
|
$326.91
|
|
Mohawk Gold (H28)
|
Bright gold tone
|
$326.91
|
|
Cherry (C26)
|
Warm cherry-red
|
$326.91
|
|
Ebony (D3)
|
Near-black
|
$326.91
|
|
Grande Isle (F3)
|
Warm coastal tone
|
$326.91
|
INSTALLATION NOTE
Prepare the landing surface—remove all carpet, tack strips, staples, and adhesive. Surface must be clean, flat, and dry. Install the Landing Tread (sold separately) on the leading edge first. Lay panels parallel to the nosing edge using tongue-and-groove construction—apply Loctite PL Premium adhesive to the back face of each panel, snap into the previous panel, and secure with a brad nailer through the tongue at 6-inch intervals. Trim the final row to fit with a miter saw. If unfinished, sand to 120-grit, stain, and apply 2 coats of polyurethane after installation. Allow 48 hours before foot traffic.
STAIN / FINISH TIP
For the best color match across your full staircase, order the Landing Panel System in the same prefinished stain color as your retro or traditional treads. Prefinished colors are produced in batches, so ordering together helps ensure a consistent match. If ordering unfinished, use the same stain product and finish coat as your treads for a consistent look. Order our Red Oak Stain Colors Sample Pack ($19.95) to test all colors on real Red Oak before buying.
Log In